加工性能及特點：

主要用于鋁合金型材、鋁幕墻型材及鋁塑門窗安裝孔的加工。

l 采用可編程控制器（PLC）控制，保證了設備運行的穩定性及可靠性。

l 鉆頭可實現單動、雙動及聯動，也可任意自由組合。

l 適用于截面不超過200*250mm的型材。

l 氣液阻尼控制進給，運行穩定。

l 可備選多頭鉆座，滿足多組群孔的同時加工。

技術參數：

電    源：380V   50HZ              電機功率：4×1.1KW   1400r/min    最大鉆孔直徑：13mm                     

兩鉆孔最大距離：5000mm    每組孔最小距離：300mm                    動力頭數量：4個  

鉆頭前后移動最大距離：120mm        動力頭上下移動距離：150mm

工作臺尺寸(長×寬)：300×300(mm)         鉆頭進給行程：125mm    進氣壓力：0.5～0.8MPa                  

加工鋁型材最大截面尺寸：250×250mm   外形尺寸(長×寬×高)：5500×1900×1000mm

重  量       1500kg

Processing Performance and Features

It is used for drilling holes of aluminum and wall-curtain profiles, as well as drilling assembling holes of Aluminum and PVC window and door.

Adopt programmable controller (PLC) ensures the machine running steady and reliable.

The drilling heads can be used individually, combinatively or jointly as well as be combined at will.

The section of profile is not more than 250×250mm, the processing length is up to 5000mm.

The speed of saw blade infeed is linerity adjustable by air-hydraulic damper.

Option

Adopting: multi-drilling head are optional to meet multi-group holes processing in one time.

Adopting: it can increase the powered head quantity base from the basic configuration.

Technical parameter